Digitus CAT 8.1 S/FTP Patchkabel,3m

The high-end network solution according to the CAT 8.1 standard

- Reach a bandwidth of up to 2000 MHz
- With LSZH (low smoke zero halogen) outer sheath for best fire behavior and low smoke emission
- Transparent green colored connector with metal shielding for easy identification of Category 8.1 (2000 MHz)
- Inner conductor: Copper (Cu)
- PoE++ compatible

The DIGITUS® Category 8.1 Class I patch cables are manufactured and tested according to the ISO/IEC 11801 and DIN EN 50173 CAT 8.1 standards. They guarantee that the cable installation complies with the ISO & EN channel specification and provide excellent performance in the DIGITUS® CAT 8.1 cabling. The performance was tested up to 2000 MHz, including performance characteristics such as near-end crosstalk (“NEXT”). The DIGITUS® patch cables were specifically designed to fully meet all requirements in various application areas. Each cable is equipped with a molded anti-kink sleeve with strain relief. In addition, the sleeve has a locking lever protection, which prevents kinking of the cables and breaking-off of the locking lever from the connector. Category 8.1 is simply identified by the green colored connectors.

• 2 x RJ45 connectors (8P8C)
• Covers with kink protection, strain relief and locking lever protection
• Length designation on the covers
• Inner conductor: Copper (Cu)
• Halogen free: yes
• Pin assignment: 1:1
• Category: 8.1
• AWG cross-section: 24
• Anti-kink sleeve: molded
• Connector 1 type: RJ45 8(8)
• Connector 2 type: RJ45 8(8)
• Cable construction: 4 x 2
• Flame retardant version: yes
• Anti-kink sleeve color: Grey
• Locking lever protection: yes
• NVP value: 76
• Oil resistant to EN 60811-404: no
• Sheath color: Grey
• Length: 3 m