Bituxx Lewarek / Żaba Podnośnik hydrauliczny niski profil PLN-01 3T - Stix

PLN-01 3T frog type hydraulic car lift

Professional lift up to 3 tons

The PLN-01 hydraulic lift (popular "frog") with a maximum lifting capacity of up to 3 tons is an ideal device for easy and fast lifting of passenger cars, as well as light delivery vehicles. The PLN-01 model is a professional equipment with a reinforced design, which will prove useful in any car workshop.

Low profile 75 mm

The lifter's foot with a rubber pad in the resting position is placed at a height of 75 mm. This makes it possible to lift cars with lowered suspension, such as sports cars, without problems. An additional convenience is the specially contoured shape of the jack body, which makes it easy to slide it under the chassis.

Lifting height of 505 mm

With the PLN-01 hydraulic jack, the vehicle can be lifted to a maximum height of 505 mm. This is a sufficient height for placing stands - so-called "cradles" - under the vehicle.

Long lever with protective foam

The 105 cm long lever makes it easy to work with the jack. The lever works with moderate resistance allowing you to control the lifting process. The lever is easy to disassemble and disassemble into two parts after use. A thick foam is stretched over the lower part of the lever to protect the vehicle from accidental impact with the lever during lifting.

Dual pump

The jack's double hydraulic cylinder makes it possible to lift a load quickly without using a lot of force. It only takes 8 full movements of the lever to reach full height.

Gentle lowering of the vehicle

The jack's trigger valve is operated by a lever, which is a very convenient solution. By slowly turning the lever to the left, the load can be lowered in a controlled manner. On the other hand, turning the lever to the right allows the load to be lifted. There is no need to take your hands off the lever and bend down to operate the valve directly, as is found in amateur lifters.

Easy maneuvering of the lifter

Two swivel casters make it easy to position the jack under the vehicle. Use of the jack in tight spaces will be facilitated by a lever composed of two parts - the top part can be quickly removed if necessary.

Solid construction

The PLN-01 hydraulic jack, due to its simple and solid construction, is predisposed for both private and professional use. The steel construction, weighing 29 kg, guarantees a long-lasting and trouble-free use of the device (provided you maintain proper maintenance according to the recommendations in the manual). The wheels of the jack are metal, the frame is welded, and the individual components are solidly bolted together.

Remember to use the hoists

The hydraulic jack is used to lift the vehicle - after it is lifted, you need to place under the vehicle (in the places designated for this purpose) car supports, the so-called "hoops".